Comprehensive Tutorial for Installing a New Shower Unit

Call Us Today

What're your thoughts and feelings on How to Install a Shower Enclosure ?

A successful shower setup requires careful preparation and also a great deal of job. Most of the times, you will require to do three kinds of jobs: mounting walls, setting up the plumbing, and also finishing walls.

Preparation

To start with, you need to select the sort of shower that you want to install. It is important to establish whether the chosen shower can managing specific systems and can regulate a risk-free degree of water with the central heating boiler. Many shower units nowadays are made to be versatile to different water pressures (such as kept warm water and also cold mains).
It is also vital to consider the water pressure as well as the preparation of the piping as well as drain for the shower

Different Sorts Of Shower Units

Push-on Mixer: The hose and also spray parts of the push-on mixer shower system can be attached to the bath faucet as per your demand, and the water temperature level can be changed by means of the taps. Push-on mixers are cheap and extremely straightforward to set up. Nevertheless, although the tube connection is basic, it is conveniently removed. Furthermore, it is inconvenient to readjust the temperature level.

Bath/Shower Mixer: The hose as well as spray of this sort of shower are incorporated with a bath mixer tap, and also the temperature level can be adjusted with the bathroom faucets. It is a very low-cost alternative and no extra plumbing is involved. Nonetheless, the bath/shower mixers also experience troublesome temperature level control alternatives.

Handbook Mixer: The pipe as well as spray of a manual mixer shower system belong of the wall system and also the hot and cold water materials are attached to a single valve The temperature level and also pressure of the water are managed through either one or a range of knobs (in extra pricey showers). Although temperature control is much easier in manual mixer types, they are extra expensive than the previously pointed out mixers. They likewise call for additional plumbing of hot and cold water system pipelines.

Thermostatic Mixer: The tube and also spray of this shower type are a part of the wall surface unit and the cold and hot water supplies are linked to a single shutoff right here too. It is total with a built-in stabiliser to self-adjust the water temperature level and to avoid it from coming to be also warm. Among the greatest advantages of a thermostatic mixer shower type consists of hassle-free temperature level control. Nonetheless, it is one of the most pricey of the various mixer alternatives.

Power Shower: A power shower is a solitary device having an effective electrical pump that can altering both the water pressure and also temperature level. This type of shower can be fitted if there is water system from a cold water tank and a warm water cylinder. A power shower makes the adjustment of both pressure as well as temperature simple. On the other hand, it disagrees for water heated straight by the shower or where the water is provided by a combination boiler under keys pressure.

Electric Shower: An electrical shower is plumbed into a mains cold water supply and it heats up the water electrically. It is very important to note that for this shower kind to be mounted, the mains pressure requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The system allows the temperature level as well as stress to be changed via a handle. Designs with temperature stabilisers are much better as they remain untouched by various other taps in other places being used within the household. A major downside of electric showers is that the control handle only allows for the choice of heats at less stress, or reduced temperatures at a better stress. This is problematic in the winter season when the spray is usually weak and the mains water is chillier. Nonetheless, this trouble is tackled in some models which are readily available with a winter/summer setup.

Method

Depending on the kind of shower you desire to set up, the shower head should either be suited order to prevent its contact with the water in the bathroom listed below or the base tray, or it must have a check shutoff.
Prior to beginning, it is suggested to note the positions of the shower head and also control, and to intend the pipe-work included. In addition, the drainage system to eliminate the waste water will certainly require to be prepared. Both positions of the wire course and the shower button will additionally require to be thought about if an instantaneous or electrical shower unit is being mounted.
Use the instruction overview offered with the shower device to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is essential to cut off the water system. In order to shield the pipes, they must be given a water resistant covering as well as likewise fitted with separating valves. The pipes can then be buried into the wall surface as well as glued over to neaten the overall look.
Fit the base tray, shower head, and also installations.
Link the primary shower control to the pipes that will certainly be providing the water (This might call for a female screw string adapter).
Reconnect the water system as well as examination the pipelines for any type of leakages, as some may need tightening.
If you are setting up an electrical shower, keep in mind to switch off the electrical power supply prior to making any kind of electric links. When these links have actually been made (there should be assistance within the user's manual), the power supply can be switched back on.

Readjusting Water Stress to Suit Your Shower

The cold water storage tank can be raised to a higher height (in some cases as low as 150mm (6inches)) by installation a solid wood support underneath it - perhaps made up of struts and blockboards. If you pick this choice, the main and also circulation pipes will certainly also have to be raised to meet the brand-new elevation of the storage tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be linked right into the power supply in order to run.

Piping as well as Drain

It is best to use 15mm size supply pipelines, and make the runs to the shower as short and straight as feasible so as to keep optimal stress and minimise heat loss. In addition, by reducing making use of elbow joints for pipeline edges, you can reduce the resistance in the circulation of the water. You can attain this by bending the pipelines rather.

A Lot Of Common Blunders

Going against or neglecting local code constraints.

Making use of pipes that are too tiny.

Connecting copper to galvanized without making use of a brass or dielectric suitable between both.

Not making use of tape or pipe substance at threaded joints.

Uneven your fixtures when installing them.

Not mounting an air gap filling for fixtures.

Reducing supply stub outs as well short to set up the shutoff valves onto after the ended up wall remains in location.

Not properly lining up tubing right into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leak.).

When turning the water back on in your home, constantly run the outside pipe shutoff or purge your toilets to hemorrhage dust as well as air from the lines. This particles can cause issues in your sink taps as well as various other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

As an avid reader on How to Install a One-Piece Shower Unit, I assumed sharing that article post was a good thing. Appreciated our write up? Please share it. Help another person find it. I enjoy reading our article about How to Install a Freestand.

Click Here